PRODUCT INTRODUCTION
UF Membrane IGFUF160-IP-PVC series pressure-type ultrafiltration membrane modules use imported PVC raw materials, which have a long service life and a filtration accuracy of 0.01 microns. Due to the strong rigidity of PVC material, thicker capillaries can be made to withstand higher working pressures and are suitable for internal pressure operation. The internal pressure structure is suitable for raw water with low turbidity and low suspended solids content; when the product is running, the pollutants are trapped on the inner surface of the membrane, avoiding dead ends and making it easier to flush.
Advantage of IGFUF160-IP-PVC
- It is suitable for surface water, groundwater, water plant renovation, seawater desalination, reuse of reclaimed water, reuse of sewage and wastewater, and material separation and concentration industries, with high cost performance and stability;
- It is used in projects with small and medium-sized processing capacity (generally 1-30 tons/hour);
- The end cover and the clamp structure have stronger pressure bearing capacity, which can effectively prevent the burst and water leakage caused by the instantaneous high pressure and impact of the medium-sized ultrafiltration system;
- The shell is made of high-toughness UPVC material, which has good anti-aging, acid and alkali resistance and chemical stability, and is suitable for a wide range of working conditions;
- The unique 7-sector wire loading process is adopted to make the water distribution in the shell uniform;
- The water inlet and outlet are all national standard size interfaces, and the four slip-knot threaded end caps are of uniform size, which is convenient for installation and maintenance.
MEMBRANE FIBER FEATURES:
The filter effect of membrane is good for using double-skin structure:
Modified PVC membrane is asymmetric double-skin structure, the feed liquid is filtered twice in the process of filtration, which ensure the water quality of the effluent is good.
The physical properties of membrane are strong:
By using international high-quality raw materials and leading production technology, the bursting pressure of the membrane can reach to 1.3 MPa, the mechanical strength can reach to 1.51 MPa, the elongation at break can reach to 52% , which can effectively avoid the breakage of the membrane.
The hydrophilic property of membrane filaments is strong:
After the hydrophilic modification, the hydrophilic angle of the membrane can reach to 48° , the flux can be very large at very low pressure, the operating pressure difference is low, and the concentration polarization on the membrane surface is not easy to form.
The effect of backwash is good:
By adopting the international advanced pore-forming technology, the filter channel is inverted horn-shaped, which makes the back-washing water flow stronger, the pollutants easier to be flushed, and the membrane flux can be maximized.
The chemical stability is strong:
The tolerance range of PH is 2 to 12, and the tolerance of residual chlorine is up to 500 ppm, which can effectively ensure the obstinate pollution is washed down from the surface of the membrane, so that the flux is restored and the membrane life is prolonged.
PRODUCT DRAWING
